Ventilation is designed into every ramp to allow for adequate airflow. All our ramps are fully enclosed to prevent trash collection and unwanted access. Quite simply, the most demanding finishing standard available.

Heavy-duty, hot galvanized steel safety rails, built to last forever. Vertical solid bars contain flying skateboards, and (unlike horizontal pickets) they are challenging to climb.

Hot galvanized steel toe plates. The smoothest on the market. Our approach angles are smaller than any competitor.

Hot galvanized 3 mm thick steel tube to grind on. The surface behind this coping is protected with a steel grind plate; BMX pegs can not damage the surface.

All inclined outside edges are protected by rounded (5 mm (1/4”)) galvanized steel profiles mounted flush with the skating surface. Offered exclusively by RHINO, this unique edge protection protects the surface edges and minimizes the effect of an impact on the skaters.

All the transitions of our ramps are protected with galvanized steel transition plates mounted flush with the surface. With no gaps or sharp edges, our changes skate smoother and safer than our competitors.

Used for non-skateable edges, they give the ramps a quality finish.

All vertical seams in the riding surface are covered with a hot galvanized steel seam protection, mounted flush with the surface. This unique solution creates a smoother riding surface and protects the inside edges of the surface.

The side panels are supported by 6 mm (1/4″) HPL strips to allow good ventilation and the ventilation holes in the side panels.

All the screws have a specially designed, double asymmetric thread. These screws hold 40 % better than standard screws and won’t come loose under mechanical pressure. Anti-vandalism heads prevent disassembling.

The quality of this specially developed riding surface is second to none. It’s the dream of every skater combined with a durability comparable to steel. This surface has a perfect grip on the skate wheels; it significantly impacts and is gouges resistant, it’s fire-resistant, absorbs no water, and doesn’t burn your skin when you slide on the ramps. Together with our unique sub-construction, this surface gives the ramps the professional feeling the skaters are looking for. Under our riding surface, you can find a glass-fiber reinforced PP-underlay to reduce the noise as much as possible.

We have kinked, straight, rectangular, and round grind rails in several different configurations. The ends of all of our grind rails are curved down to minimize the effect of an impact.